Products
Single phase AC output SSR relay
VA Series SSRs are easy to use proportional controllers. Designed to provide proportional AC power to a wide range of resistive loads.
Features of VA Series SSRs include:
- Ratings from 10A to 120A @ 220 VAC
- 200k or 560K Ohm potentiometer control
- Protective Cover Included
- For use with resistive loads only
Product details
FEATURES
1.Rated current: 10-120A
2.Built-in RC
3.With LED indicator
4.High dielectric strength up to 4000V
5.High isolation strength 1000Ω/500VDC
6.Zero cross or random turn-on
7.DC orAC control
DIMENSIONS

WIRING DIAGRAM

PRECAUTIONS
1.Whenchoosing a SSR, please consider the actual load current and working ambient temperature.
2.Apply heat-radiation silicon grease or a heat conductive sheet between SSR and heat sink.
3.Tighten SSR terminal screws properly.
4.Please do not use SSR beyond the descriptions in the datasheet.
PARAMETER TABLE
| TYPES | KSSR-148¨DA | KSSR-148¨AA |
| INPUT | ||
| Input voltage range | 3-32VDC | 70-280VAC |
| Max input current | 12mA | 15mA |
| Turn on voltage | 2.8VDC | 70VAC |
| Turn off voltage | 1.5VDC | 50VAC |
| OUTPUT | ||
| Load voltage range | 24-480VAC | |
| Peak voltage | 800V | |
| Load current | 10A,25A,40A,60A,80A,100A,120A | |
| Max off-state leakage current | 2mA | |
| Max on-state voltage drop | 1.5V | |
| GENERAL | ||
| Length * Width * Height(mm) | 58*45*33(with protection cover) | |
| Weight(approx.) | 100g | |
| Dielectric strength (input to output) | 4000V | |
| Dielectric strength (input,output to base) | 2500V | |
| Operating temperature | -20℃~80℃ | |
| Certification | CE | |
























