Products

Three phase solid state relay

Three-phase solid-state relays (SSRs) are designed for efficient control of three-phase loads and are widely used in industrial automation, HVAC systems, motor control and other fields. The product uses advanced semiconductor technology to provide excellent performance and reliability, ensuring stable operation in various harsh environments and suitable for various industrial applications. Its design ensures stability and safety under high load conditions to meet the needs of different customers. Our three-phase SSRs have been rigorously tested to ensure stability under high temperature and high load environments. The product design complies with international safety standards to ensure the safety of users during use.

Product details

FEATERES

1. Rated current: 10-120A 
2. Built-in RC 
3. With LED indicator 
4. High dielectric strength up to 4000V 
5. High isolation strength 1000Ω/500VDC 
6. Zero cross or random turn-on
7. DC or AC control

DIMENSIONS

1.Three phase SSR.png

WIRING DIAGRAM

2.Three phase SSR.png

PRECAUTIONS

Notes on Solid State Relays (SSRs) Handling High Inrush Current

1.If the load may generate high inrush current (such as light bulbs, etc.), please make sure the SSR can withstand the inrush current.

When selecting a solid-state relay, it is crucial to understand the characteristics of the load. Some loads (such as incandescent lamps, motors, etc.) will generate a transient surge current when starting, which may be several times the normal operating current. Make sure that the rated surge current of the selected SSR is higher than the surge current of the load to avoid overloading and damage to the SSR. Check the product specification to confirm the surge current withstand capacity of the SSR and select the appropriate model according to the actual application.

2.If the surge current exceeds the range, a fast fuse must be connected at the output.

To protect the SSR from excessive surge current, it is recommended to install a fast-acting fuse at the output. Fast-acting fuses can cut off the current in a short time to prevent overload conditions from damaging the SSR. When selecting a fuse, make sure its rated current and response time are suitable for your application so that it can cut off the power supply in time when a surge current occurs to protect the equipment.

3.If the instantaneous voltage exceeds the range, a varistor must be connected in parallel at the output end. A 750V varistor is recommended.

Transient voltages (such as grid fluctuations or lightning strikes) can damage SSRs, so connecting a varistor in parallel with the output is an effective protection measure. The varistor can quickly turn on when the voltage exceeds its rated value, thereby conducting the excess voltage to the ground and protecting the SSR and its load. A 750V varistor is recommended to ensure adequate protection in most industrial applications to prevent transient voltages from damaging the equipment.

PARAMETER TABLE

TYPES KSSR-348¨DA KSSR-348¨AA
INPUT
Input voltage range 3-32VDC 70-280VAC
Max input current 40mA 15mA
Turn on voltage 4VDC 70VAC
Turn off voltage 2.7VDC 50VAC
OUTPUT
Load voltage range 24-480VAC
Peak voltage 1000V
Load current 10A,25A,40A,50A,60A,80A,100A,120A
Max off-state leakage current ≤8mA
Max on-state voltage drop 1.5V
GENERAL
Length * Width * Height(mm) 105L*74W*33H
Weight(approx.) 360g
Dielectric strength (input to output) 4000Vac
Dielectric strength (input,output to base) 2500Vac
Operating temperature  -20℃~80℃
Certification CE

1.Three phase SSR.jpg2.Three phase SSR.jpg3..jpg4.1Three phase SSR.jpg4.2Three phase SSR.jpg5.Three phase SSR.jpg6.Three phase SSR.jpg7.Three phase SSR.jpg8.Three phase SSR.jpg9.Three phase SSR.jpg10,Three phase SSR.jpg11.1Three phase SSR.jpg11.2Three phase SSR.jpg04.jpg4.jpg5.jpg6.jpg