Products

SSR-P Series PCB Type Solid State Module (SSR)

Features:

1.High dielectric strength over 4KV

2.High isolation strength over 100MΩ/500VDC

3.High surge current sustenance

4.High surge voltage sustenance

5.Conformity with EN60947-4-3 and EN60950

Product details

SPECIFICATIONS

INPUT KSSR-P124□DA KSSR-P122□DD
Control voltage range 3-32VDC
Max input current 6-35mA
Must turn-on voltage 3.5VDC
Must turn-off voltage 1.5VDC
OUTPUT
Load voltage 220VAC,380VAC 60VDC,110VDC,220VDC
Max load current 1A.2A.3A.4A.5A.6A.7A
Off-state leakage current <1.5mA
On-state voltage drop ≦1.5V
GENERAL
Dielectric strength 2500V
Operating temperature -20℃-70℃
Certificate CE

OUTLINE DIMENSIONS

SSR-P Series PCB Type Solid State Module (SSR).jpg

PRECAUTIONS:

1.For relay welding, the welding time should not exceed 10 seconds at 260’c, not exceed 5 seconds at 350℃.

2.When wiring the relay, make sure that the polarity of the input terminal is correct, so as not to damage the relay.

3.The heat sink is built-in, if the heat dissipation regulation is poor.the output load current should be derated.

4.lf the transient voltage at both ends of the relay exceeds thenominal value,a varistor should be connected in parallel at the output end of the relay to prevent the relay from being broken dow.

1.SSR-P Series PCB Type Solid State Module (SSR).jpg2.SSR-P Series PCB Type Solid State Module (SSR).jpg3.SSR-P Series PCB Type Solid State Module (SSR).jpg4.SSR-P Series PCB Type Solid State Module (SSR).jpg5.SSR-P Series PCB Type Solid State Module (SSR).jpg